Description

Malt Muncher – 2 Roller Grain Mill
Mill it in style with your new cold steel rollers with 6061 Aluminium chassis. This Malt Muncher is adjustable to get your grain bill crushed exactly the way you want it. 10mm crank shaft as standard, perfect for the entry level millers wanting to use a drill to keep rolling.

Or if you want a work out and look like a pro arm wrestling champion, a manual crank comes as standard just to get you going.

Compatible with our High Torque Motor coming soon.
If you are going to be using a drill, don’t go crazy with speed, you can risk cooking/burning your grain and impeding the mills performance. If at all possible just enough power to get it going and catching. This should fall around the 200rpm mark.

Includes:
– Grain hopper (2.7kg capacity)

– Manual Crank handle

– 10mm crank shaft

– Roller adjustment knobs

– Reinforced chassis with pre aligned mounting holes for perfect stability if mounting to a board.

– 12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging
These units have been designed for Malted Barley, Wheat & Rye. We do not take returns for mis-use outside of these parameters.

Malt Muncher – 3 Roller Grain Mill

The Malt Muncher 3 Roller Grain Mill is specifically designed to give that extra crush when passing through. If you’re after bigger grain hopper capacity and the ability to double crush to your exact specifications then this is perfect for you.

Many have argued over the years that two rollers may be good but three is better! Here at KegLand we ask ourselves, does it mill? then it fits the bill!

With approximate 5.5kg of hopper space this large and in charge Malt Muncher will get through your bill lickity split.

Just like the 2 Roller the 3 Roller has an adjustable roller, but only the third bottom one that does that refined crushing.
Compatible with our High Torque Motor coming soon.
If you are going to be using a drill, don’t go crazy with speed, you can risk cooking/burning your grain and impeding the mills performance. If at all possible just enough power to get it going and catching. This should fall around the 200rpm mark.

Includes:
– Grain hopper

– Manual Crank handle

– 12mm crank shaft

– Roller adjustment knobs

– Reinforced chassis with pre aligned mounting holes for perfect stability if mounting to a board.

– 12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging

These units have been designed for Malted Barley, Wheat & Rye.

Plastic Board for Malt Muncher 2 Roller and 3Roller Grain Mill
This is a Plastic Base Board for the Malt Muncher 2 Roller and 3Roller Grain Mill. Perfect for slotting over a food grade bucket, or building your own little shelf on wheels.

NEW – This new design is compatible with both mills that we sell. It has several different holes pre-drilled so you can simply use either mill and this base board will work perfectly.

Total Dimensions:
450 x 340 mm, 15mm thick
Hole Dimension:
115 x 70 mm
(screw holes 140mm apart)
(requires M6x30mm bolts to mount to the two roller mill, not included)